References

[1]

N. Lieven and D. Ewins, “A proposal for standard notation and terminology in modal analysis,” Int. J. Anal. and Exp. Modal Analysis, vol. 7, no. 2, pp. 151–156, 1992.

[2]

K. McConnell, Vibration Testing. Theory and Practice. Wiley Interscience, New-York, 1995.

[3]

W. Heylen, S. Lammens, and P. Sas, Modal Analysis Theory and Testing. KUL Press, Leuven, Belgium, 1997.

[4]

D. Ewins, Modal Testing: Theory and Practice. John Wiley and Sons, Inc., New York, NY, 1984.

[5]

E. Balmes, Methods for vibration design and validation. Course notes ENSAM/Ecole Centrale Paris, 1997-2012.

[6]

“Vibration and shock - experimental determination of mechanical mobility,” ISO 7626, 1986.

[7]

R. J. Craig, A. Kurdila, and H. Kim, “State-space formulation of multi-shaker modal analysis,” Int. J. Anal. and Exp. Modal Analysis, vol. 5, no. 3, 1990.

[8]

M. Richardson and D. Formenti, “Global curve fitting of frequency response measurements using the rational fraction polynomial method,” International Modal Analysis Conference, pp. 390–397, 1985.

[9]

E. Balmes, “Frequency domain identification of structural dynamics using the pole/residue parametrization,” International Modal Analysis Conference, pp. 540–546, 1996.

[10]

E. Balmes, “Integration of existing methods and user knowledge in a mimo identification algorithm for structures with high modal densities,” International Modal Analysis Conference, pp. 613–619, 1993.

[11]

P. Guillaume, R. Pintelon, and J. Schoukens, “Parametric identification of multivariable systems in the frequency domain : a survey,” International Seminar on Modal Analysis, Leuven, September, pp. 1069–1080, 1996.

[12]

E. Balmes, “New results on the identification of normal modes from experimental complex modes,” Mechanical Systems and Signal Processing, vol. 11, no. 2, pp. 229–243, 1997.

[13]

A. Sestieri and S. Ibrahim, “Analysis of errors and approximations in the use of modal coordinates,” Journal of sound and vibration, vol. 177, no. 2, pp. 145–157, 1994.

[14]

D. Kammer, “Effect of model error on sensor placement for on-orbit modal identification of large space structures,” J. Guidance, Control, and Dynamics, vol. 15, no. 2, pp. 334–341, 1992.

[15]

E. Balmes, “Review and evaluation of shape expansion methods,” International Modal Analysis Conference, pp. 555–561, 2000.

[16]

E. Balmes, “Sensors, degrees of freedom, and generalized modeshape expansion methods,” International Modal Analysis Conference, pp. 628–634, 1999.

[17]

A. Chouaki, P. Ladevèze, and L. Proslier, “Updating Structural Dynamic Models with Emphasis on the Damping Properties,” AIAA Journal, vol. 36, pp. 1094–1099, June 1998.

[18]

E. Balmes, “Optimal ritz vectors for component mode synthesis using the singular value decomposition,” AIAA Journal, vol. 34, no. 6, pp. 1256–1260, 1996.

[19]

D. Kammer, “Test-analysis model development using an exact modal reduction,” International Journal of Analytical and Experimental Modal Analysis, pp. 174–179, 1987.

[20]

J. O'Callahan, P. Avitabile, and R. Riemer, “System equivalent reduction expansion process (serep),” IMAC VII, pp. 29–37, 1989.

[21]

R. Guyan, “Reduction of mass and stiffness matrices,” AIAA Journal, vol. 3, p. 380, 1965.

[22]

R. Kidder, “Reduction of structural frequency equations,” AIAA Journal, vol. 11, no. 6, 1973.

[23]

M. Paz, “Dynamic condensation,” AIAA Journal, vol. 22, no. 5, pp. 724–727, 1984.

[24]

M. Levine-West, A. Kissil, and M. Milman, “Evaluation of mode shape expansion techniques on the micro-precision interferometer truss,” International Modal Analysis Conference, pp. 212–218, 1994.

[25]

E. Balmes and L. Billet, “Using expansion and interface reduction to enhance structural modification methods,” International Modal Analysis Conference, February 2001.

[26]

MSC/NASTRAN, Quick Reference Guide 70.7. MacNeal Shwendler Corp., Los Angeles, CA, February,, 1998.

[27]

E. Balmes, “Model reduction for systems with frequency dependent damping properties,” International Modal Analysis Conference, pp. 223–229, 1997.

[28]

T. Hasselman, “Modal coupling in lightly damped structures,” AIAA Journal, vol. 14, no. 11, pp. 1627–1628, 1976.

[29]

A. Plouin and E. Balmes, “A test validated model of plates with constrained viscoelastic materials,” International Modal Analysis Conference, pp. 194–200, 1999.

[30]

E. Balmes and S. Germès, “Tools for viscoelastic damping treatment design. application to an automotive floor panel.,” ISMA, September 2002.

[31]

E. Balmes, Viscoelastic vibration toolbox, User Manual. SDTools, 2004-2013.

[32]

J.-M. Berthelot, Materiaux composites - Comportement mecanique et analyse des structures. Masson, 1992.

[33]

N. Atalla, M. Hamdi, and R. Panneton, “Enhanced weak integral formulation for the mixed (u,p) poroelastic equations,” The Journal of the Acoustical Society of America, vol. 109, pp. 3065–3068, 2001.

[34]

J. Allard and N. Atalla, Propagation of sound in porous media: modelling sound absorbing materials. Wiley, 2009.

[35]

A. Girard, “Modal effective mass models in structural dynamics,” International Modal Analysis Conference, pp. 45–50, 1991.

[36]

R. J. Craig, “A review of time-domain and frequency domain component mode synthesis methods,” Int. J. Anal. and Exp. Modal Analysis, vol. 2, no. 2, pp. 59–72, 1987.

[37]

M. Géradin and D. Rixen, Mechanical Vibrations. Theory and Application to Structural Dynamics. John Wiley & Wiley and Sons, 1994, also in French, Masson, Paris, 1993.

[38]

C. Farhat and M. Géradin, “On the general solution by a direct method of a large-scale singular system of linear equations: Application to the analysis of floating structures,” International Journal for Numerical Methods in Engineering, vol. 41, pp. 675–696, 1998.

[39]

R. J. Craig and M. Bampton, “Coupling of substructures for dynamic analyses,” AIAA Journal, vol. 6, no. 7, pp. 1313–1319, 1968.

[40]

E. Balmes, “Use of generalized interface degrees of freedom in component mode synthesis,” International Modal Analysis Conference, pp. 204–210, 1996.

[41]

E. Balmes, “Parametric families of reduced finite element models. theory and applications,” Mechanical Systems and Signal Processing, vol. 10, no. 4, pp. 381–394, 1996.

[42]

E. Balmes, “Efficient sensitivity analysis based on finite element model reduction,” International Modal Analysis Conference, pp. 1168–1174, 1998.

[43]

T. Hughes, The Finite Element Method, Linear Static and Dynamic Finite Element Analysis. Prentice-Hall International, 1987.

[44]

H. J.-P. Morand and R. Ohayon, Fluid Structure Interaction. J. Wiley & Sons 1995, Masson, 1992.

[45]

J. Imbert, Analyse des Structures par Eléments Finis. E.N.S.A.E. Cépaques Editions.

[46]

J. Batoz, K. Bathe, and L. Ho, “A study of tree-node triangular plate bending elements,” Int. J. Num. Meth. in Eng., vol. 15, pp. 1771–1812, 1980.

[47]

R. G. and V. C., “Calcul modal par sous-structuration classique et cyclique,” Code_Aster, Version 5.0, R4.06.02-B, pp. 1–34, 1998.

[48]

S. Smith and C. Beattie, “Simultaneous expansion and orthogonalization of measured modes for structure identification,” Dynamics Specialist Conference, AIAA-90-1218-CP, pp. 261–270, 1990.

[49]

E. Balmes, “Orthogonal maximum sequence sensor placements algorithms
for modal tests, expansion and visibility.,” IMAC, January 2005.

[50]

K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, “A fast and elitist multiobjective genetic algorithm: Nsga-ii,” IEEE transactions on evolutionary computation, vol. 6, no. 2, pp. 182–197, 2002.

[51]

C. Johnson, “Discontinuous galerkin finite element methods for second order hyperbolic problems,” Computer methods in Applied Mechanics and Engineering, no. 107, pp. 117–129, 1993.

[52]

M. Hulbert and T. Hughes, “Space-time finite element methods for second-order hyperbolic equations,” Computer methods in Applied Mechanics and Engineering, no. 84, pp. 327–348, 1990.

[53]

G. Vermot Des Roches, Frequency and time simulation of squeal instabilities. Application to the design of industrial automotive brakes. PhD thesis, Ecole Centrale Paris, CIFRE SDTools, 2010.

[54]

M. Jean, “The non-smooth contact dynamics method,” Computer methods in Applied Mechanics and Engineering, no. 177, pp. 235–257, 1999.

[55]

R. J. Craig and M. Blair, “A generalized multiple-input, multiple-ouptut modal parameter estimation algorithm,” AIAA Journal, vol. 23, no. 6, pp. 931–937, 1985.

[56]

N. Lieven and D. Ewins, “Spatial correlation of modeshapes, the coordinate modal assurance criterion (comac),” International Modal Analysis Conference, 1988.

[57]

D. Hunt, “Application of an enhanced coordinate modal assurance criterion,” International Modal Analysis Conference, pp. 66–71, 1992.

[58]

R. Williams, J. Crowley, and H. Vold, “The multivariate mode indicator function in modal analysis,” International Modal Analysis Conference, pp. 66–70, 1985.

[59]

E. Balmes, C. Chapelier, P. Lubrina, and P. Fargette, “An evaluation of modal testing results based on the force appropriation method,” International Modal Analysis Conference, pp. 47–53, 1995.

[60]

A. W. Phillips, R. J. Allemang, and W. A. Fladung, The Complex Mode Indicator Function (CMIF) as a parameter estimation method. International Modal Analysis Conference, 1998.